• Self drilling fastener for fixing a façade panel to aluminium rails.
• Supplied with a pre-assembled centering sleeve.

ETA-22/0793

ETA-24/0682

Rockpanel ETA -13/0340 & ETA-24/0910 

EPD available

Aluminium (tII): 1.8-3.0

• Self drilling fastener suitable for installation of pre-drilled cladding panels onto aluminium structure

• Centering sleeve made from bio polymers recognsied for natural decomposition

• Installation of fastener centric to the pre-drilled panel given by centering sleeve

• Dilatation can be fully utilised as no residual material from the centring sleeve remains in the drill hole

• No torque control required given by reduced thread

• Secured against unwinding given by reduced thread

• Alignment of the fastener to the panel is set straight given by double-threaded thread

• Fastener head is slightly conical, thus no abrasion on the panel surface after dilatation

• Fastener can be over-tightened

• One T25W bit is included in every box supplied.

• Panel needs to be pre-drilled to Ø 10 mm
• Wearing safety glasses is recommended during the entire setting process
• The bit supplied in the box must be used
• Ensure a right angle during the entire setting process
• Make sure that the bit is mounted without play in the screwdriver
• Apply pressure at low rotation-speed until the centering sleeve breaks
• Once the centering sleve is broken, apply more presusure and increase the rotation-speed