MULTI-MONTI® Plus Carbon Steel Concrete Screw Anchor, Countersunk Head
MMS-Plus-F
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition.
Fastener Drive
T-25, T-30, T-40, T-45, T-50
Diameter Fastener [mm]
5, 6, 7.5, 10, 12
Pre-Drill Diameter [mm]
10,0, 4,0, 5,0, 6,0, 8,0
- Prop assemblance
- Fixing of cable ducts
- Mounting of assembly rails
- Pipe mounting
- Fixing of railing
- Mounting of pipe clamps
- Installation of push-pull props/formwork
- Fixing of brackets and console bearers
- Easy settable screw anchor even in case of worn drills
- Optimized concrete thread with full threaded variations for highest demands
- Two embedment depths for more flexibility
- Settable by means of power-tools and immediately loadbearing
- Increased product assortment and dimensions for various applications taking design and application areas into account
- Toothed functional tip reduces the abrasion and thus permits multiple use in temporary fixations
- Wider approved assortment of products for ETA option 1 from MMS-plus-6, including seismic from diameter 10mm
MULTI-MONTI® Plus Carbon Steel Concrete Screw Anchor, Countersunk Head
MMS-Plus-F
The screw anchor MULTI-MONTI-plus (MMS-plus), is an enhancement of the concrete screw MULTI-MONTI. Without the need for wall plugs, the certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. This creates a positive locking connection, which is subsequently used for the anchoring.The MULTI-MONTI-plus system is not only fast and easy to mount, but also ensures a secure connection. This is confirmed by the available ETA-certification. The screws can be mounted close to the edge and without a torque wrench, what´s more they can be removed and reused after checking the threads condition.
Fastener Drive
T-25, T-30, T-40, T-45, T-50
Diameter Fastener [mm]
5, 6, 7.5, 10, 12
Pre-Drill Diameter [mm]
10,0, 4,0, 5,0, 6,0, 8,0
- Prop assemblance
- Fixing of cable ducts
- Mounting of assembly rails
- Pipe mounting
- Fixing of railing
- Mounting of pipe clamps
- Installation of push-pull props/formwork
- Fixing of brackets and console bearers
- Easy settable screw anchor even in case of worn drills
- Optimized concrete thread with full threaded variations for highest demands
- Two embedment depths for more flexibility
- Settable by means of power-tools and immediately loadbearing
- Increased product assortment and dimensions for various applications taking design and application areas into account
- Toothed functional tip reduces the abrasion and thus permits multiple use in temporary fixations
- Wider approved assortment of products for ETA option 1 from MMS-plus-6, including seismic from diameter 10mm